"eventlet.green.zmq" -- ØMQ support
***********************************

"pyzmq" [1] is a python binding to the C++ ØMQ [2] library written in
Cython [3]. "eventlet.green.zmq" is greenthread aware version of
*pyzmq*.

The "zmq" module wraps the "Socket" and "Context" found in "pyzmq" to
be non blocking.

class eventlet.green.zmq.Context(io_threads=1, **kwargs)

   Bases: "zmq.sugar.context.Context"

   Subclass of "zmq.Context"

   socket(socket_type)

      Overridden method to ensure that the green version of socket is
      used

      Behaves the same as "zmq.Context.socket()", but ensures that a
      "Socket" with all of its send and recv methods set to be non-
      blocking is returned

class eventlet.green.zmq.Socket(context, socket_type)

   Bases: "zmq.sugar.socket.Socket"

   Green version of :class:>>`<<zmq.core.socket.Socket

   The following three methods are always overridden:
      * send

      * recv

      * getsockopt

   To ensure that the "zmq.NOBLOCK" flag is set and that sending or
   receiving is deferred to the hub (using
   "eventlet.hubs.trampoline()") if a "zmq.EAGAIN" (retry) error is
   raised

   For some socket types, the following methods are also overridden:
      * send_multipart

      * recv_multipart

   recv(flags=0, copy=True, track=False)

      Receive a message.

      With flags=NOBLOCK, this raises "ZMQError" if no messages have
      arrived; otherwise, this waits until a message arrives. See
      "Poller" for more general non-blocking I/O.

      flags : int
         0 or NOBLOCK.

      copy : bool
         Should the message be received in a copying or non-copying
         manner? If False a Frame object is returned, if True a string
         copy of message is returned.

      track : bool
         Should the message be tracked for notification that ZMQ has
         finished with it? (ignored if copy=True)

      msg : bytes or Frame
         The received message frame.  If *copy* is False, then it will
         be a Frame, otherwise it will be bytes.

      ZMQError
         for any of the reasons zmq_msg_recv might fail (including if
         NOBLOCK is set and no new messages have arrived).

   send(msg, flags=0, copy=True, track=False)

      Send a single zmq message frame on this socket.

      This queues the message to be sent by the IO thread at a later
      time.

      With flags=NOBLOCK, this raises "ZMQError" if the queue is full;
      otherwise, this waits until space is available. See "Poller" for
      more general non-blocking I/O.

      data : bytes, Frame, memoryview
         The content of the message. This can be any object that
         provides the Python buffer API (i.e. *memoryview(data)* can
         be called).

      flags : int
         0, NOBLOCK, SNDMORE, or NOBLOCK|SNDMORE.

      copy : bool
         Should the message be sent in a copying or non-copying
         manner.

      track : bool
         Should the message be tracked for notification that ZMQ has
         finished with it? (ignored if copy=True)

      routing_id : int
         For use with SERVER sockets

      group : str
         For use with RADIO sockets

      None : if *copy* or not track
         None if message was sent, raises an exception otherwise.

      MessageTracker : if track and not copy
         a MessageTracker object, whose *pending* property will be
         True until the send is completed.

      TypeError
         If a unicode object is passed

      ValueError
         If *track=True*, but an untracked Frame is passed.

      ZMQError
         If the send does not succeed for any reason (including if
         NOBLOCK is set and the outgoing queue is full).

      Changed in version 17.0: DRAFT support for routing_id and group
      arguments.

   bind

      Bind the socket to an address.

      This causes the socket to listen on a network port. Sockets on
      the other side of this connection will use
      "Socket.connect(addr)" to connect to this socket.

      addr : str
         The address string. This has the form
         'protocol://interface:port', for example
         'tcp://127.0.0.1:5555'. Protocols supported include tcp, udp,
         pgm, epgm, inproc and ipc. If the address is unicode, it is
         encoded to utf-8 first.

   bind_to_random_port(addr, min_port=49152, max_port=65536, max_tries=100)

      Bind this socket to a random port in a range.

      If the port range is unspecified, the system will choose the
      port.

      addr : str
         The address string without the port to pass to
         "Socket.bind()".

      min_port : int, optional
         The minimum port in the range of ports to try (inclusive).

      max_port : int, optional
         The maximum port in the range of ports to try (exclusive).

      max_tries : int, optional
         The maximum number of bind attempts to make.

      port : int
         The port the socket was bound to.

      ZMQBindError
         if *max_tries* reached before successful bind

   close(linger=None)

      Close the socket.

      If linger is specified, LINGER sockopt will be set prior to
      closing.

      This can be called to close the socket by hand. If this is not
      called, the socket will automatically be closed when it is
      garbage collected.

   connect

      Connect to a remote 0MQ socket.

      addr : str
         The address string. This has the form
         'protocol://interface:port', for example
         'tcp://127.0.0.1:5555'. Protocols supported are tcp, upd,
         pgm, inproc and ipc. If the address is unicode, it is encoded
         to utf-8 first.

   disable_monitor()

      Shutdown the PAIR socket (created using get_monitor_socket) that
      is serving socket events.

      New in version 14.4.

   disconnect

      Disconnect from a remote 0MQ socket (undoes a call to connect).

      New in version libzmq-3.2.

      New in version 13.0.

      addr : str
         The address string. This has the form
         'protocol://interface:port', for example
         'tcp://127.0.0.1:5555'. Protocols supported are tcp, upd,
         pgm, inproc and ipc. If the address is unicode, it is encoded
         to utf-8 first.

   fileno()

      Return edge-triggered file descriptor for this socket.

      This is a read-only edge-triggered file descriptor for both read
      and write events on this socket. It is important that all
      available events be consumed when an event is detected,
      otherwise the read event will not trigger again.

      New in version 17.0.

   get

      Get the value of a socket option.

      See the 0MQ API documentation for details on specific options.

      option : int
         The option to get.  Available values will depend on your
         version of libzmq.  Examples include:

            zmq.IDENTITY, HWM, LINGER, FD, EVENTS

      optval : int or bytes
         The value of the option as a bytestring or int.

   get_hwm()

      Get the High Water Mark.

      On libzmq ≥ 3, this gets SNDHWM if available, otherwise RCVHWM

   get_monitor_socket(events=None, addr=None)

      Return a connected PAIR socket ready to receive the event
      notifications.

      New in version libzmq-4.0.

      New in version 14.0.

      events : int [default: ZMQ_EVENTS_ALL]
         The bitmask defining which events are wanted.

      addr : string [default: None]
         The optional endpoint for the monitoring sockets.

      socket : (PAIR)
         The socket is already connected and ready to receive
         messages.

   get_string(option, encoding='utf-8')

      Get the value of a socket option.

      See the 0MQ documentation for details on specific options.

      option : int
         The option to retrieve.

      optval : unicode string (unicode on py2, str on py3)
         The value of the option as a unicode string.

   getsockopt(option)

      s.get(option)

      Get the value of a socket option.

      See the 0MQ API documentation for details on specific options.

      option : int
         The option to get.  Available values will depend on your
         version of libzmq.  Examples include:

            zmq.IDENTITY, HWM, LINGER, FD, EVENTS

      optval : int or bytes
         The value of the option as a bytestring or int.

   getsockopt_string(option, encoding='utf-8')

      Get the value of a socket option.

      See the 0MQ documentation for details on specific options.

      option : int
         The option to retrieve.

      optval : unicode string (unicode on py2, str on py3)
         The value of the option as a unicode string.

   getsockopt_unicode(option, encoding='utf-8')

      Get the value of a socket option.

      See the 0MQ documentation for details on specific options.

      option : int
         The option to retrieve.

      optval : unicode string (unicode on py2, str on py3)
         The value of the option as a unicode string.

   hwm

      Get the High Water Mark.

      On libzmq ≥ 3, this gets SNDHWM if available, otherwise RCVHWM

   join

      Join a RADIO-DISH group

      Only for DISH sockets.

      libzmq and pyzmq must have been built with ZMQ_BUILD_DRAFT_API

      New in version 17.

   leave

      Leave a RADIO-DISH group

      Only for DISH sockets.

      libzmq and pyzmq must have been built with ZMQ_BUILD_DRAFT_API

      New in version 17.

   monitor

      Start publishing socket events on inproc. See libzmq docs for
      zmq_monitor for details.

      While this function is available from libzmq 3.2, pyzmq cannot
      parse monitor messages from libzmq prior to 4.0.

      addr : str
         The inproc url used for monitoring. Passing None as the addr
         will cause an existing socket monitor to be deregistered.

      events : int [default: zmq.EVENT_ALL]
         The zmq event bitmask for which events will be sent to the
         monitor.

   poll(timeout=None, flags=1)

      Poll the socket for events. See "Poller" to wait for multiple
      sockets at once.

      timeout : int [default: None]
         The timeout (in milliseconds) to wait for an event. If
         unspecified (or specified None), will wait forever for an
         event.

      flags : int [default: POLLIN]
         POLLIN, POLLOUT, or POLLIN|POLLOUT. The event flags to poll
         for.

      events : int
         The events that are ready and waiting, 0 if the timeout was
         reached with no events.

   recv(flags=0, copy=True, track=False)

      Receive a message.

      With flags=NOBLOCK, this raises "ZMQError" if no messages have
      arrived; otherwise, this waits until a message arrives. See
      "Poller" for more general non-blocking I/O.

      flags : int
         0 or NOBLOCK.

      copy : bool
         Should the message be received in a copying or non-copying
         manner? If False a Frame object is returned, if True a string
         copy of message is returned.

      track : bool
         Should the message be tracked for notification that ZMQ has
         finished with it? (ignored if copy=True)

      msg : bytes or Frame
         The received message frame.  If *copy* is False, then it will
         be a Frame, otherwise it will be bytes.

      ZMQError
         for any of the reasons zmq_msg_recv might fail (including if
         NOBLOCK is set and no new messages have arrived).

   recv_json(flags=0, **kwargs)

      Receive a Python object as a message using json to serialize.

      Keyword arguments are passed on to json.loads

      flags : int
         Any valid flags for "Socket.recv()".

      obj : Python object
         The Python object that arrives as a message.

      ZMQError
         for any of the reasons "recv()" might fail

   recv_multipart(flags=0, copy=True, track=False)

      Receive a multipart message as a list of bytes or Frame objects

      flags : int, optional
         Any valid flags for "Socket.recv()".

      copy : bool, optional
         Should the message frame(s) be received in a copying or non-
         copying manner? If False a Frame object is returned for each
         part, if True a copy of the bytes is made for each frame.

      track : bool, optional
         Should the message frame(s) be tracked for notification that
         ZMQ has finished with it? (ignored if copy=True)

      msg_parts : list
         A list of frames in the multipart message; either Frames or
         bytes, depending on *copy*.

      ZMQError
         for any of the reasons "recv()" might fail

   recv_pyobj(flags=0)

      Receive a Python object as a message using pickle to serialize.

      flags : int
         Any valid flags for "Socket.recv()".

      obj : Python object
         The Python object that arrives as a message.

      ZMQError
         for any of the reasons "recv()" might fail

   recv_serialized(deserialize, flags=0, copy=True)

      Receive a message with a custom deserialization function.

      New in version 17.

      deserialize : callable
         The deserialization function to use. deserialize will be
         called with one argument: the list of frames returned by
         recv_multipart() and can return any object.

      flags : int, optional
         Any valid flags for "Socket.recv()".

      copy : bool, optional
         Whether to recv bytes or Frame objects.

      obj : object
         The object returned by the deserialization function.

      ZMQError
         for any of the reasons "recv()" might fail

   recv_string(flags=0, encoding='utf-8')

      Receive a unicode string, as sent by send_string.

      flags : int
         Any valid flags for "Socket.recv()".

      encoding : str [default: 'utf-8']
         The encoding to be used

      s : unicode string (unicode on py2, str on py3)
         The Python unicode string that arrives as encoded bytes.

      ZMQError
         for any of the reasons "recv()" might fail

   recv_unicode(flags=0, encoding='utf-8')

      Receive a unicode string, as sent by send_string.

      flags : int
         Any valid flags for "Socket.recv()".

      encoding : str [default: 'utf-8']
         The encoding to be used

      s : unicode string (unicode on py2, str on py3)
         The Python unicode string that arrives as encoded bytes.

      ZMQError
         for any of the reasons "recv()" might fail

   send(msg, flags=0, copy=True, track=False)

      Send a single zmq message frame on this socket.

      This queues the message to be sent by the IO thread at a later
      time.

      With flags=NOBLOCK, this raises "ZMQError" if the queue is full;
      otherwise, this waits until space is available. See "Poller" for
      more general non-blocking I/O.

      data : bytes, Frame, memoryview
         The content of the message. This can be any object that
         provides the Python buffer API (i.e. *memoryview(data)* can
         be called).

      flags : int
         0, NOBLOCK, SNDMORE, or NOBLOCK|SNDMORE.

      copy : bool
         Should the message be sent in a copying or non-copying
         manner.

      track : bool
         Should the message be tracked for notification that ZMQ has
         finished with it? (ignored if copy=True)

      routing_id : int
         For use with SERVER sockets

      group : str
         For use with RADIO sockets

      None : if *copy* or not track
         None if message was sent, raises an exception otherwise.

      MessageTracker : if track and not copy
         a MessageTracker object, whose *pending* property will be
         True until the send is completed.

      TypeError
         If a unicode object is passed

      ValueError
         If *track=True*, but an untracked Frame is passed.

      ZMQError
         If the send does not succeed for any reason (including if
         NOBLOCK is set and the outgoing queue is full).

      Changed in version 17.0: DRAFT support for routing_id and group
      arguments.

   send_json(obj, flags=0, **kwargs)

      Send a Python object as a message using json to serialize.

      Keyword arguments are passed on to json.dumps

      obj : Python object
         The Python object to send

      flags : int
         Any valid flags for "Socket.send()"

   send_multipart(msg_parts, flags=0, copy=True, track=False)

      Send a sequence of buffers as a multipart message.

      The zmq.SNDMORE flag is added to all msg parts before the last.

      msg_parts : iterable
         A sequence of objects to send as a multipart message. Each
         element can be any sendable object (Frame, bytes, buffer-
         providers)

      flags : int, optional
         Any valid flags for "Socket.send()". SNDMORE is added
         automatically for frames before the last.

      copy : bool, optional
         Should the frame(s) be sent in a copying or non-copying
         manner. If copy=False, frames smaller than
         self.copy_threshold bytes will be copied anyway.

      track : bool, optional
         Should the frame(s) be tracked for notification that ZMQ has
         finished with it (ignored if copy=True).

      None : if copy or not track MessageTracker : if track and not
      copy

         a MessageTracker object, whose *pending* property will be
         True until the last send is completed.

   send_pyobj(obj, flags=0, protocol=2)

      Send a Python object as a message using pickle to serialize.

      obj : Python object
         The Python object to send.

      flags : int
         Any valid flags for "Socket.send()".

      protocol : int
         The pickle protocol number to use. The default is
         pickle.DEFAULT_PROTOCOL where defined, and
         pickle.HIGHEST_PROTOCOL elsewhere.

   send_serialized(msg, serialize, flags=0, copy=True, **kwargs)

      Send a message with a custom serialization function.

      New in version 17.

      msg : The message to be sent. Can be any object serializable by
      *serialize*. serialize : callable

         The serialization function to use. serialize(msg) should
         return an iterable of sendable message frames (e.g. bytes
         objects), which will be passed to send_multipart.

      flags : int, optional
         Any valid flags for "Socket.send()".

      copy : bool, optional
         Whether to copy the frames.

   send_string(u, flags=0, copy=True, encoding='utf-8')

      Send a Python unicode string as a message with an encoding.

      0MQ communicates with raw bytes, so you must encode/decode text
      (unicode on py2, str on py3) around 0MQ.

      u : Python unicode string (unicode on py2, str on py3)
         The unicode string to send.

      flags : int, optional
         Any valid flags for "Socket.send()".

      encoding : str [default: 'utf-8']
         The encoding to be used

   send_unicode(u, flags=0, copy=True, encoding='utf-8', **kwargs)

      Send a Python unicode string as a message with an encoding.

      0MQ communicates with raw bytes, so you must encode/decode text
      (unicode on py2, str on py3) around 0MQ.

      u : Python unicode string (unicode on py2, str on py3)
         The unicode string to send.

      flags : int, optional
         Any valid flags for "Socket.send()".

      encoding : str [default: 'utf-8']
         The encoding to be used

   set

      Set socket options.

      See the 0MQ API documentation for details on specific options.

      option : int
         The option to set.  Available values will depend on your
         version of libzmq.  Examples include:

            zmq.SUBSCRIBE, UNSUBSCRIBE, IDENTITY, HWM, LINGER, FD

      optval : int or bytes
         The value of the option to set.

      Warning: All options other than zmq.SUBSCRIBE, zmq.UNSUBSCRIBE
        and zmq.LINGER only take effect for subsequent socket
        bind/connects.

   set_hwm(value)

      Set the High Water Mark.

      On libzmq ≥ 3, this sets both SNDHWM and RCVHWM

      Warning: New values only take effect for subsequent socket
        bind/connects.

   set_string(option, optval, encoding='utf-8')

      Set socket options with a unicode object.

      This is simply a wrapper for setsockopt to protect from encoding
      ambiguity.

      See the 0MQ documentation for details on specific options.

      option : int
         The name of the option to set. Can be any of: SUBSCRIBE,
         UNSUBSCRIBE, IDENTITY

      optval : unicode string (unicode on py2, str on py3)
         The value of the option to set.

      encoding : str
         The encoding to be used, default is utf8

   setsockopt

      s.set(option, optval)

      Set socket options.

      See the 0MQ API documentation for details on specific options.

      option : int
         The option to set.  Available values will depend on your
         version of libzmq.  Examples include:

            zmq.SUBSCRIBE, UNSUBSCRIBE, IDENTITY, HWM, LINGER, FD

      optval : int or bytes
         The value of the option to set.

      Warning: All options other than zmq.SUBSCRIBE, zmq.UNSUBSCRIBE
        and zmq.LINGER only take effect for subsequent socket
        bind/connects.

   setsockopt_string(option, optval, encoding='utf-8')

      Set socket options with a unicode object.

      This is simply a wrapper for setsockopt to protect from encoding
      ambiguity.

      See the 0MQ documentation for details on specific options.

      option : int
         The name of the option to set. Can be any of: SUBSCRIBE,
         UNSUBSCRIBE, IDENTITY

      optval : unicode string (unicode on py2, str on py3)
         The value of the option to set.

      encoding : str
         The encoding to be used, default is utf8

   setsockopt_unicode(option, optval, encoding='utf-8')

      Set socket options with a unicode object.

      This is simply a wrapper for setsockopt to protect from encoding
      ambiguity.

      See the 0MQ documentation for details on specific options.

      option : int
         The name of the option to set. Can be any of: SUBSCRIBE,
         UNSUBSCRIBE, IDENTITY

      optval : unicode string (unicode on py2, str on py3)
         The value of the option to set.

      encoding : str
         The encoding to be used, default is utf8

   classmethod shadow(address)

      Shadow an existing libzmq socket

      address is the integer address of the libzmq socket or an FFI
      pointer to it.

      New in version 14.1.

   subscribe(topic)

      Subscribe to a topic

      Only for SUB sockets.

      New in version 15.3.

   unbind

      Unbind from an address (undoes a call to bind).

      New in version libzmq-3.2.

      New in version 13.0.

      addr : str
         The address string. This has the form
         'protocol://interface:port', for example
         'tcp://127.0.0.1:5555'. Protocols supported are tcp, upd,
         pgm, inproc and ipc. If the address is unicode, it is encoded
         to utf-8 first.

   underlying

      The address of the underlying libzmq socket

   unsubscribe(topic)

      Unsubscribe from a topic

      Only for SUB sockets.

      New in version 15.3.

[1] http://github.com/zeromq/pyzmq

[2] http://www.zeromq.com

[3] http://www.cython.org
